Registering And De-Registering Handsets; Automatic Registration: Gigaset C 1 On Gigaset C 100 Or C 150 - Siemens Gigaset 150 Owner's Manual

Registering and de-registering handsets

Registering and de-registering handsets
You can register up to six handsets on your base.
A C 1 that is not yet registered on a base is registered automatically. Handsets that
belong to the Gigaset 1000, 2000, 3000, 4000 families and handsets made by other
manufacturers must be registered manually.
A C 1 handset can be registered on one base.

Automatic registration: Gigaset C 1 on Gigaset C 100 or C 150

Any handset that is not registered on a base can be registered automatically.
To register your handset for the first time, place it in the base with the display up. Reg-
istration takes around one minute. While registration is in progress the screen displays
Registering Base 1 and Base 1 flashes. The handset will be automatically assigned
the lowest unassigned internal number (1–6). You will see this number in the top left
of the display after registration, e.g. '1' . This means that the handset has been assigned
the first internal number. If all internal numbers 1–6 have been assigned (six handsets
are registered on a base), the number 6 is overwritten if that handset is in idle status.
Automatic registration is not possible when the base on which you
N
wish to register the handset is being used to make a call.
i
You can give a registered handset a different internal number
N
(page 56) or a different name (page 55).
52