Setting Up The Handset For Use; Connecting The Base Station - Gigaset a490 Instruction Manual

Connecting the base station

¤
Connect the plug from the power
supply 1.
¤
Plug the power adapter into the plug
socket 2.
¤
Then connect the telephone jack
and insert the cables into the cable
ducts.
Please note:
◆
The power adapter must always be
connected, as the phone will not
operate without mains connection.
◆
Only use the power adapter and
phone cord supplied. Pin connec-
tions on telephone cables can vary.

Setting up the handset for use

Inserting the batteries and closing the battery cover
Use only rechargeable batteries recommended by Gigaset Communications
GmbH (
other battery types as this could result in significant health risks and personal
injury. For example, the batteries could explode. The phone could also mal-
function or be damaged as a result of using batteries that are not of the rec-
ommended type.
The display is protected by a plastic film.
Please remove the protective film!
Warning
¢
page 16). Never use a conventional (non-rechargeable) battery or
5
2
1
3
1
3
1