Advertisement
STEREO
SYSTEM
COMPOSITION
Shelves
Installing the stereo amplifier
Make
sure
that the shelves are stable
Choose
a location
where
the heat
and
fully capable
of supporting
heavy
will be dissipated easily.
weights and resisting vibration.
@ Do not stack another stereo compo-
nent
immediately
above the stereo
amplifier but leave a clearance of at
least 10cm.
—
@The
stereo
amplifier
weighs a full
26kg so make
sure that the stereo
rack shelf is not bent and that the
rack
itself
is erected
on
a stable
foundation.
Tuner
Turntable
@Do
not
make
the
connecting
eSet
the
turntable
so
that
it is
cords longer than necessary.
not affected by vibration.
e Set the antenna in the direction
eKeep the dust cover closed as
best suited for reception.
much as possible.
e Use an external antenna for FM
e Stack the records up for storage
— do not lay them flat.
eDo
not
expose
pre-recorded
tapes near the stereo system for
long-periods of time.
@ Do not store the tapes anywhere
near a magnetic field.
Tape deck
@ Make
sure
you
clamp
the
reels
when using the tape deck.
e Attach the dust cover when not
in use.
Thick curtains
e Use curtains to shade the stereo
system
from the direct rays of
the sun.
eCurtains
also
help
to
reduce
resonance
and
reverberation
in
the listening room.
Speaker system
e Install the speakers to the left and right so
that they are subject to the same conditions
}
both to the side and at the back. (The bass
is more
pronounced
if you
set them
up
The sound quality some-
times
changes depending
on
the position
and the
material of the furniture.
Carpets on the floor
help
to
absorb
the
against a wall.)
Connecting the speakers
sound.
elnstall
the
speakers
so
that
they
are
not
Use high current capacity con-
.
on
affected
by vibration
transmitted
through
necting cords and do not make
Listening position is slightly to the apex of an equilateral
the floor.
them longer than necessary.
triangle formed with left and right speakers.
INSTALLATION
CAUTIONS
To ensure the best sound
quality and trouble-free
operation, avoid setting up the amplifier in any of the
locations described below:
Locations liable to downgrade performance
and result in breakdowns
Resulting trouble
Advertisement
