Address Setting; Network Mode Setting - Pioneer ODR PREMIER RS-A1 Owner's Manual

@ Address setting
Multiple audio units* such as the RS-A1/RS-A2 Amplifier and Digital Equalizers
can be connected to the ODR System. Therefore, each audio unit must be
assigned an address as identification number (1 to 8).
Set the address according to the following rules:
+ Seta unique address to each audio unit.
+ The first audio unit must be assigned to Address 1.
+ Ifthe Digital Equalizer RS-P1 is included among the audio units, it must be
assigned as Address 1. Therefore, assign Addresses 2 to 8 to other audio units.
> The RS-P1 is fixed to Address 1, and this setting cannot be changed.
lf the Digital Equalizers RS-P50 is used instead of the RS-P1, assign Address 1 to
one of the RS-P50 equalizers.
@ Network mode setting
Set the mode for the network according to the purpose of the speakers to be con-
nected,
THRU mode (Frequency: 20 — 20,000Hz)
Set to this mode when the speaker to be connected will be used in full-range.
> In this mode, the functions of the network are disabled.
> This mode is invalid if the RS-P1 or RS-P50 Digital Equalizer is used in the ODR System.
> When using the ODR System in this mode, other digital amplifiers (RS-A1/RS-A2) must also
be set to THRU mode.
S.W. - MONO (subwoofer monaural) mode (Frequency: 20 — 250Hz)
Set to this mode when the speaker to be connected will be used as subwoofer to
output monaural sound.
S.W. - L (subwoofer L channel) mode (Frequency: 20 — 250Hz)
Set to this mode when the speaker to be connected will be used as subwoofer to
output L (left) channel sound.
S.W. - R (subwoofer R channel) mode (Frequency: 20 — 250Hz)
Set to this mode when the speaker to be connected will be used as subwoofer to
output R (right) channel sound.
S.W. - ST (subwoofer stereo) mode (Frequency: 20 — 250Hz)
Set to this mode when the speakers to be connected will be used as subwoofers
to output stereo sound.
*Audio units
By definition, audio units are Digital Amplifiers, Digital
Equalizer and other audio equipment for the ODR
System including the following:
— Dual 1/3 Octave Digital Equalizer [RS-P1]
— Universal Digital Preamp/Equalizer [RS-P50]
— Digital "Pure Class A" Integrated Amplifier [RS-A1]
— Digitat "Class A" Integrated Amplifier [RS-A2]