Silvercrest CRB-631 User Manual page 38

CRB-631 - Troubleshooting
Problem
The inserted CD
cannot be played.
Poor radio reception. Reception conditions are
The radio reception
is choppy or
frequently
interrupted.
The radio only
receives a few
stations
The music is only
played back by one
speaker group.
NO FILE
Not all MP3/WMA
tracks are played
back.
Note:
 If you do not have sufficient knowledge to install the radio yourself, consult an
expert. Please note that any resulting costs will not be borne by JNC.
38
Cause
The CD was inserted with
the printed side facing
downwards.
The CD has too many
scratches.
The CD is dirty.
The device temperature is
too high.
The CD contains incorrect
or faulty data.
poor.
The AF function is
activated.
The REG function is
activated.
The BALANCE and/or
FADER settings are faulty.
The CD does not meet the
CompactDisc standard or
does not contain any MP3 /
WMA files.
Wrong coding of the files
that are not being played
back.
Too many files are stored
on the CD.
Solution
Flip the CD over and try again.
Create another CD from the
original or have the CD repaired.
Clean the CD (without cleaning
agents, just a lint-free cloth).
Lower the volume of the device.
The CD cannot be used with this
device. Burn your audio data onto
a separate data carrier and try
again.
Change your location to achieve
better reception.
Deactivate the AF function.
Deactivate the REG function.
Check the BALANCE or FADER
settings.
Create a CD that meets the
CompactDisc standard.
Recode the files.
A maximum of 1,000 tracks can be
handled per CD. Create a CD with
fewer than 1,000 tracks.