Auto Low Power; Auto Shut-Off - Konica Minolta BIZHUB PRO 1050 Operator's Manual

Hide thumbs Also See for BIZHUB PRO 1050:

Table of Contents

Preparation for Use

Auto Low Power

This function conserves energy by lowering the power consumption to

454.25W or less in standby mode.

Auto Low Power activates automatically after a specified period (initially 15

minutes) of copier inactivity with the Power Save LED lit, touch panel gone

off, and all other LEDs except Start LED on the control panel turned off. The

Start LED will turn red, while the Power LED keeps green.

To start a copying job, press [Power Save] on the control panel.

The Auto Low Power function can be set to 5 minutes/ 10 minutes/ 15

minutes/ 30 minutes/ 60 minutes/ 90 minutes/ 120 minutes/ 240 minutes.

For details,refer to "Lists of the function settings" on page 15-5.

If the Auto Shut-Off function activates at the same time, the power will be

The touch panel will not go off during a duplex copying job or when the

Jam Position Screen is displayed.

This function achieves further energy conservation by reducing power con-

sumption to 105W or less in standby mode.

In the initial setting, Auto Shut-Off follows Auto Low Power after a specified

period (initially 90 minutes) of copier inactivity, with the Power Save LED lit

and all other LEDs on the control panel and touch panel turned off. The Pow-

er LED keeps green.

To start a copying job, press [Power Save]. The copying operation will

become available.

The Auto shut-off can be set for 30 minutes/ 60 minutes/ 90 minutes/ 120

minutes/ 240 minutes, or can be deactivated. For details, refer to "Lists

of the function settings" on page 15-5.

bizhub PRO 1050