Auto Low Power/Auto Shut Off [12] - Konica Minolta 7055 Instruction Manual

Section 12 : Key Operator Mode
Auto Low Power/Auto Shut Off [11]
Select the interval of time that must elapse before Auto Low Power and Auto Shut Off
become activated. Or, select the Auto Shut Off function to On or Off.
Setting options: See list below
Key Operator Mode Screen 1
Timer Setting Screen
Procedure
1 While pressing [ HELP ], turn power ON. Enter a 4-digit key operator password, then
touch OK to display the Key Operator Mode Screen. (See note.)
2 To display menus [11] to [13] of the Key Operator Mode Screen, touch the lower
arrow key.
3 Touch [11] Auto Low Power-Auto Shut off to display the Timer Setting Screen.
NOTE:
If an unvalid Key operator password is entered, continue by entering the valid 4-digit password.
4 The Timer Key is located on the Timer Setting Screen below the Auto Low Power
indicator. Touch the Timer Key to select a specific waiting period before activation of
the Auto Low Power function. The default setting is 15min.
If the Auto Shut off function is not desired, proceed to step 6.
If the "Auto Low Power" indicator light is dim and the Timer Key cannot be selected,
proceed to step 5.
NOTES:
1 The period of time selected for Auto Low Power cannot exceed the Auto Shut Off setting.
2 If the same period of time as Auto Shut Off is selected, the Auto Low Power indicator light will
dim, and Auto Shut Off will function instead of Auto Low Power.
12 - 48
Key Operator Mode Screen 2
Auto Shut Off ON/OFF Setting Screen