To Stop Scanning/Printing - Konica Minolta BIZHUB PRO 1050 Operator's Manual

Hide thumbs Also See for BIZHUB PRO 1050:

Table of Contents

To Stop Scanning/Printing

Follow the procedure below to stop scanning or printing.

This procedure is effective only for the job in progress. To stop the re-

served jobs on standby, operate on the Job List Screen. For details, refer

to "Overview of Job List Screen" on page 7-3.

Press [Stop] while the current job is in progress.

With the popup menu displayed right after pressing [Start], the job cannot

be canceled even if [Stop] is pressed. According to the procedure "Scan-

ning reserve job while printing" on page 5-25 touch an appropriate key

on the popup menu to clear it.

The current machine operation of the selected job will be suspended,

and the popup menu will be displayed on the Copy Screen.

Touch the desired key on the popup menu.

The popup menu will vary according to the job in progress.

Before Making Copies

bizhub PRO 1050