To Check/Control Spool Jobs - Konica Minolta BIZHUB PRO 1050 Operator's Manual

Hide thumbs Also See for BIZHUB PRO 1050:

Table of Contents

Job Management

To Check/Control Spool Jobs

Use this function to display spool jobs as a list.

The list includes following information.

- Job No.: consecutive numbers of both copy and print jobs

- Mode: Wait for RIP or Receiving (current status of the spool job)

Follow the procedure below to change the output order or delete the spool

Touch [JOB LIST] tab on the Copy Screen, then touch [Spool].

Check the status of the spool jobs.

Touch [Next] to scroll, if 8 or more jobs are entered.

Select the desired job, then select the job operation.

To specify the next job to be printed:

Touch to highlight the desired job key, then touch [Print Next].

The highlighted job will be moved just under the current print job.

This will not function if printing operation has already been started for the

selected job.

bizhub PRO 1050