To Turn Off The Power - Konica Minolta BIZHUB PRO 1050 Operator's Manual

Preparation for Use
2.2.2

To Turn Off the Power

1
Turn OFF the sub power switch.
- The sub power switch is located
on the right side of the control
panel.
- The touch panel and all the LEDs
on the control panel other than
the Power LED will go out, and
the Power LED will turn red from
green.
Reminder
When the machine is under control of the Weekly Timer function, do not
turn off the power. Turning off the power will deactivate the function.
2
Turn OFF the main power switch.
- The main power switch is located
inside the machine.
- Open the front door and left side
door to reach it.
Reminder
Be sure not to turn off the main power
switch in usual operation.
When turning the main power switch off then on, be sure to wait 10 sec-
onds or longer before turning it on again; otherwise the machine may not
operate properly.
bizhub PRO 1050
2
2-19