Administrator Mode; Administrator Mode - System Tab; Administrator Password - Konica Minolta BIZHUB PRO 1050 Operator's Manual

18
18.4

Administrator Mode

By logging into PageScope Web Connection in Administrator Mode, you can
configure or confirm the image controller system.
For the details on the login procedure for Administrator Mode, refer to "Log-
ging in Using Administrator Mode" on page 18-8.
18.5 Administrator Mode – System Tab
On the [System] tab, information concerning the system configuration of the
machine and settings is displayed.

18.5.1 Administrator Password

This screen appears when you click [Administrator Password] on the [Sys-
tem] tab. The screen is used to change the administrator password.
- Current Password:
Enter the current administrator password. The password is displayed in
asterisks (*).
- New Password:
Enter a new administrator password. Maximum eight alphanumeric char-
acters can used. The password is displayed in asterisks (*).
- Retype New Password:
Retype the new password as entered above for confirmation.
- [Apply] button:
Click the button to apply the new settings.
- [Clear] button:
Click the button to clear the settings that were entered or selected.
18-10
Browser Control Setting
bizhub PRO 1050