Selecting Binding Direction Of Originals - Konica Minolta BIZHUB PRO 1050 Operator's Manual

Basic Job Settings
6.2.2

Selecting Binding Direction of Originals

When copying double-sided originals in 2-1 or 2-2 mode, the copied sets will
be exactly the same in page arrangement as the originals.
Use this function to obtain the single- or double-sided copies having the
same edge as page top, from double-sided originals printed upside down on
the reverse side.
Note
For details, refer to "Setting Binding Direction for Duplex Copies" on
page 9-12.
Specifications for Binding Direction of Originals:
- Upper Binding is available only in 2-1 or 2-2 copy mode.
- If the machine restores the initial setting, this function will be reset to R&L
Binding.
- The machine is set to match the Original binding direction and Copy
binding direction automatically. For details, refer to "02 Each Function
Setting" on page 16-37.
1
Touch [Original Setting] on the Copy Screen.
The Special Original popup menu will be displayed.
bizhub PRO 1050
R & L Binding
Upper Binding
6
6-9