Memory Scan Mode - Konica Minolta BIZHUB PRO 1050 Operator's Manual

6
6.3

Memory Scan Mode

Use Memory Scan mode to scan more than 100 originals into memory then
to start a continuous printing job, or to combine images scanned from ADF
and original glass.
Specification for Memory Scan Mode:
- Memory Scan mode is necessarily used in the following functions: Mak-
ing double-sided copies using original glass, Image Insert, Book Copy,
Program Job, Storing image in Overlay Memory
1
Make copying selections on the Copy Screen, as desired.
2
Touch [Memory Scan] to highlight it.
The Memory Scan mode will be activated.
!
Details
[Memory Scan] may already be highlighted depending on the selected
copy conditions.
3
Position original(s), then press [Start].
Using original glass:
- Place original FACE DOWN. Start scanning from the first page.
- Repeat this step for all originals.
Using ADF:
- Position originals FACE UP.
If the number of originals exceeds 100, divide them into blocks not
exceeding 100 sheets and load them from the block with the first
page.
6-20
Basic Job Settings
bizhub PRO 1050