To Select Paper Size Automatically (Aps) - Konica Minolta BIZHUB PRO 1050 Operator's Manual

Hide thumbs Also See for BIZHUB PRO 1050:

Table of Contents

Basic Job Settings

To Select Paper Size Automatically (APS)

APS detects the original size placed on the ADF or original glass and auto-

matically selects and feeds copy paper of the same size, or selects an ap-

propriate size according to the magnification ratio selected.

The original sizes to be detected from the ADF or original glass are pre-

viously determined. For details, refer to "ADF Originals" on page 3-11.

The original sizes to be detected from the ADF or original glass can be

changed by the machine manager. For details, refer to "07 Size Setting"

on page 17-35.

The machine manager can designate the tray or paper condition incom-

patible with APS. For details, refer to "02 Each Function Setting" on

The machine manager can deactivate APS when original is set in the ADF

or on the original glass.

Specifications for APS:

- APS is incompatible with AMS, however, Rotation is available.

- APS will not select the tray of the size specified as non-standard or wide

Touch [Auto Paper Select] at lower right corner of the Copy Screen.

Select additional copy conditions as desired, then position original(s).

bizhub PRO 1050