Positioning Originals; Positioning Originals In Adf - Konica Minolta BIZHUB PRO 1050 Operator's Manual

Before Making Copies
5.4

Positioning Originals

5.4.1

Positioning Originals in ADF

The document feeder (ADF) automatically feeds up to 100 originals directly
to the original glass area, starting with the top sheet. The ADF should only be
used for unstapled, smooth, flat originals.
Positioning originals in Normal mode
1
Arrange originals in order.
Reminder
Before placing originals in the tray, be sure the document feeder is closed
fully. Once closed, do not open the document feeder, otherwise the se-
lected copy conditions may be altered automatically.
Be sure not to use unsuitable ADF originals.
2
Position original(s) FACE UP in the document feeder tray.
- Place two-sided originals with
page one FACE UP.
Up to 100 originals can be set at
a time.
Reminder
Do not set more than 100 originals or
over the limit line indicated on the pa-
per guides; otherwise a paper misfeed
will occur.
If the number of originals exceeds 100, divide them into blocks not ex-
ceeding 100 sheets, then load them from the block with the first page.
3
Adjust paper guides.
bizhub PRO 1050
5
5-13