Silvercrest KH 2198 Operating Instructions Manual page 10

Projection alarm clock
Hide thumbs


Table of Contents
The technical details of the device allow for a setable frequency range outside
of the permissible 87,5–108 MHz and/or 526,5–1606,5 kHz. In different
countries various national regulations regarding the allocated radio frequency
range can exist. Please note that information received outside of the assigned
radio frequency ranges may not be used, passed on to third parties or otherwise
Mains adapter:
(Mains adapter not supplied)
Input voltage:
Output voltage:
Rated current:
Even when using 3 V mains adapter, a battery must be inserted. Otherwise,
the clock will not function.
For Model KH2198: Insert the single battery into the upper part of the battery
operation and the projection.
For Model KH2199: Insert the single battery into the compartment marked
Ensure that you have the correct polarities with the batteries and the power
False polarity will damage the device.
The device can be operated as follows:
• only with batteries ,
• with a mains power adapter and a battery for the clock.
230 V ~ 50 Hz
DC 3V (+/- 5%)
min. 300 mA
. The two other batteries, one above the other, power radio
- 8 -


Table of Contents

  Related Manuals for Silvercrest KH 2198

This manual is also suitable for:

Kh 2199

Table of Contents