HP VECTRA XW User Manual page 58

2 How to Install Accessories Inside Your PC Workstation
Installing Disk Drives
1 Disconnect the computer's power cord and any telecommunications
cable.
2 Remove the computer's cover (see page 24).
3 Slide out the power supply to provide better access to the disk drive
cables (see page 28).
4 If installing a drive in a 5.25-inch wide shelf, remove the drive tray
and put it in a safe place.
Secure the
drive in position
5 Slide the drive into the shelf.
6 Secure the drive in position using the screws provided with the drive.
46 English
Mounting Rails
Remove the
drive tray if
installing a
5.25-inch
drive
Slide the drive
into position