Power Consumption Information - HP VECTRA XW User Manual

NOTE
4 Technical Information
System Specifications

Power Consumption Information

Full Power mode
Off
When the PC Workstation is turned off with the power button on the
front panel, the power consumption falls below 5 Watts, but is not zero.
The special on/off method used by this PC Workstation considerably
extends the lifetime of the power supply. To reach zero power
consumption in "off" mode, either unplug the PC Workstation from the
power outlet or use a power block with a switch. You should be aware
that, in this case, the PC Workstation will lose its time settings within a
few days.
Typical Power Consumption/Availability for ISA Accessory Slots
+5 V 1 A limit per slot (limited by system board)
+12 V 0.2 A limit per slot (limited by system board)
- 5 V 0.2 A total power limit (limited by power supply)
-12 V 0.5 A total power limit (limited by power supply)
Typical Power Consumption/Availability for PCI Accessory Slots
+3.3 V 2.5 A maximum per slot
+5 V 2.5 A maximum per slot
+12 V 0.2 A maximum per slot
-12 V 0.2 A maximum per slot
There is a maximum per-slot limit of 15 W between all supply rails.
94 English
280 W
1
< 3 W
1
The power supply in your Vectra PC Workstation continues
to supply power to the CMOS memory, even when switched
off.