System Board Switches - HP VECTRA XW User Manual

CAUTION

System Board Switches

Switch Use Switch Block to:
1 - CONFG Retain or clear the configuration stored in EEPROM:
• OFF to retain configuration — DEFAULT
• ON to clear configuration.
2 - PSWRD Enable or clear (and disable) User and System Administrator Passwords stored in
EEPROM:
• OFF to enable passwords — DEFAULT
• ON to clear passwords.
3 - SECURE Disable or enable security mode—security mode prevents changes to the PC
Workstation's configuration with the Setup program:
• OFF to disable security mode — DEFAULT
• ON to enable security mode.
Switch 4 Switch 5
ON OFF
ON OFF
1
OFF OFF
1. Always only select the settings for a 200 MHz processor speed.
These switch settings should not be changed.
Switch 6 Switch 7 Switch 8
ON OFF OFF
OFF ON OFF
OFF ON OFF
4 Technical Information
System Connectors and Switches
System Board
Switches
Bus Processor
Speed Speed
60 MHz 150 MHz
60 MHz 180 MHz
66 MHz 200 MHz
English 101