HP VECTRA XW User Manual page 15

Installation Tools
WARNING
2 Place the PC Workstation on (or under) a sturdy desk with easily
accessible power outlets, and enough space for the keyboard, mouse,
and any other accessories.
3 Position the computer so that its rear connectors are easily
accessible.
4 Place the display next to the computer.
No tools are required to install your PC Workstation. However, if you
plan to install a disk drive or an accessory board inside your system, you
will need a flat-blade screwdriver. See chapter 2, How to Install
Accessories Inside Your PC Workstation, for more information on
installing accessories.
If you are in any doubt that you can lift the PC Workstation and the
display safely, do not try to move them without help.
1 Setting Up and Using Your PC Workstation
Unpacking Your PC Workstation
3