HP VECTRA XW User Manual page 91

Flexible Disk Drives
Security Features
If you install a flexible disk drive that uses the integrated disk interface,
the Setup program should detect and configure the drive automatically.
If you have two flexible disk drives, highlight
select or
Drive 1 Drive 2
use to start (boot) from a system diskette.
Flexible Disk Drives
Drive 1 . . . . . . . . . . . . . 3.5-inch, 1.44 MB
Drive 2 . . . . . . . . . . . . . None
Bootable Drive . . . . . . . . . Drive 1
Interface . . . . . . . . . . . . Integrated/Controller Board
If you install a flexible disk drive that has its own controller board,
highlight the
Interface
Configure the controller as described in its manual.
.
Security Features
System Administrator Password . . Not Set/Set
Start with Keyboard Locked
Flexible Disk Drives
Writing on Flexible Disks . . . . Allowed/Not Allowed
PnP Board Activation
3 Troubleshooting Your PC Workstation and Using the Setup Program
. This is the drive your PC Workstation will
Setup xxx.xx.xxx.xx
option and select
Setup xxx.xx.xxx.xx
. . . Enabled/Disabled
. . . . . . Enabled/Disabled
. . . . . . Full/None/Bootable only
Using the HP Setup Program
Bootable Drive
F1=Help On/Off
Controller Board
F1=Help On/Off
English
and
.
79