HP VECTRA XW User Manual page 88

Changing User
Preferences
Viewing Memory Size
3 Troubleshooting Your PC Workstation and Using the Setup Program
Using the HP Setup Program
Some of the User Preferences options will not be available if you have
selected
Operating System . . Windows 95
Highlight the
Space-bar Power On
want to use the space bar on your keyboard to switch on your
computer.
1
Operating System . . . . . . . . Windows 95/OS2/Windows NT/Others
User Password . . . . . . . . . Not Set/Set
Key Autorepeat Speed . . . . . . 2 to 30 per second
1. Be sure to verify that Windows NT is selected.
To speed up the computer's power-on self-test, highlight
and select
Disabled
Check that Setup has detected the memory and configured the
fields correctly. Check the
Size
check that you have installed the memory modules correctly.
Memory Size (1 MB = 1024 KB)
Base, on System Board . . . . . .
Base, on Accessory Board
Base, TOTAL . . . . . . . . . . .
Reserved . . . . . . . . . . . .
Extended . . . . . . . . . . . . 13312 KB (13.0 MB)
TOTAL . . . . . . . . . . . . . . 14336 KB (14.0 MB)
Memory Hole Below 1 MB
76 English
option and select
Setup xxx.xx.xxx.xx
USER PREFERENCES
memory size and, if it is wrong,
TOTAL
Setup xxx.xx.xxx.xx
COMPUTER INFORMATION
640 KB
. . . . 0 KB
640 KB
384 KB
. . . . . . Base = D400h
.
if you
Enabled
F1=Help On/Off
Memory Test
Memory
F1=Help On/Off
Size=16KB