HP VECTRA XW User Manual page 47

Completing the
Installation of an ISA
Accessory Board
NOTE
If you have installed an ISA accessory board that uses IRQ 9, 10, 11, or
15, you must run the Setup program and reserve the IRQ for the
accessory board. This allows PCI devices to be automatically
configured.
1 Turn on the PC Workstation and press
appears.
2 Highlight the
IRQ
3 Press or
) or make it unavailable for PCI (
PCI
4 Press to save any changes you made and exit the Setup program.
You should always leave at least one IRQ available for use by the
integrated PCI devices.
2 How to Install Accessories Inside Your PC Workstation
field you want to change, for example
to make the IRQ available for PCI (
Used by an ISA Board
Installing Accessory Boards
when
<Setup=F2>
IRQ 11
Available for
).
English
.
35