HP VECTRA XW User Manual page 96

Boot Device
Configuration Menu
3 Troubleshooting Your PC Workstation and Using the Setup Program
Using the HP Setup Program
This menu lets you configure the SCSI boot device. To know the SCSI ID
of a specific SCSI device, you can run the SCSI Disk Utilities. To do this,
select
SCSI Disk Utilities
utility (see page 82).
Please run SCSI Disk Utilities to get present devices
in your system.
Boot Target ID ............................................... 0
Options Listed Below Have NO EFFECT if Multiple Lun Support is Disabled
Boot Lun Number .............................................. 0
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit
Use the and
display a menu with a selection of values.
• Boot Target ID
This parameter is the SCSI ID of the device to boot on. The default
value is 0.
• Boot Lun Number
More advanced SCSI drives can have several logical units. This
option indicates the logical unit (or Lun) on which to boot for the
drive chosen in the
84 English
in the Options menu of the SCSISelect
SCSISelect(TM) Utility v1.xxx
Boot Device Configuration
keys to move between options. Press
Boot Target ID
. The default value is 0.
to