HP VECTRA XW User Manual page 25

3 If a Password has been set in the PC Workstation's Setup program,
the power-on prompt appears when you switch on the PC
Workstation. If the power-on prompt
Password and press
Correct password
4 When your PC Workstation has started:
Adjust the display screen's brightness and contrast to your needs.
•
If the picture does not fill the screen or is not centered refer to
the display's manual for instructions.
Set the keyboard to a comfortable position.
•
1 Setting Up and Using Your PC Workstation
Starting and Stopping Your PC Workstation
is displayed, type your
to use the PC Workstation.
Wrong password
Adjust brightness
(your display may be different
from the display shown here)
Restart the PC
Workstation, then enter
your password again.
13