Completing The Main Memory Installation Procedure - HP VECTRA XW User Manual

3 Slide each memory module into the slot at 90° to the system board
(hold the memory module with the cutouts closest to the processor).
Slide the memory module into
o
the slot at 90
4 Firmly press each memory module completely into the connector
until the retaining clips click into position.
5 Repeat this procedure for each pair of memory modules you are
installing.
6 Install any other accessories before replacing the cover (see page
24). Reconnect all cables and power cords.

Completing the Main Memory Installation Procedure:

1 Switch on the PC Workstation. When
(indicating that the Power-On-Self-Test has detected a change in
your memory configuration) follow the displayed instructions to run
the Setup program.
2 Check that Setup has automatically detected and configured the
fields. Ensure the
Memory Size
incorrect, check that you have correctly installed the memory
modules.
3 Set the extended memory limit field to
for i286 processors (or earlier processors) that cannot work with
more than 16 MB total memory.
4 Press to save and exit the Setup program.
2 How to Install Accessories Inside Your PC Workstation
Push the module until the retaining clips
click into position
Error 0250
memory is correct. If it is
TOTAL
if you use software designed
Y
Installing Main Memory
appears
English 31