Power Control - Opticon UNIVERSAL MENU BOOK Command Manual

5.3. Power control

The motor options are only applicable for
selected laser bar code readers and with
trigger enabled. In case the read time is
expired, the motor can be switched OFF. In
case the trigger is activated, the motor is
switched ON again. To reduce the start-up time
of the motor, the motor can be configured to
half speed in idle mode. The Auto shutoff time
can be configured between 1 and 9999
seconds, by reading 1 up to 4 direct input
numeric characters from chapter: String
options. A value of 0 (default) means that the
bar code reader enters the idle state if the read
time has expired.
Disable motor when idle
Enable motor when idle
Motor half speed when
idle
Auto shutoff time
OPTICON Universal menu book
SET
4Z
4Y
BBA
BBB
END
U118
_ZZ_
_4Z_
_4Y_
_BBA_
_BBB_
_ZZ_