Table of Contents
Advertisement
52
3. User's Choice
The copier has been set so that the most frequently used settings are automatically selected in
the initial mode. The User's Choice allows you to select the default settings which are
automatically selected in the initial mode according to your own needs. By setting defaults for
the paper size, zoom ratio, and other settings that would most frequently used, time and effort
to make extra settings will be eliminated that would otherwise be spent when the copier is
turned ON or when the auto reset function is activated.
*For more details, consult your Technical Representative.
Functions Available from User's Choice
Choice Code
U- 0
Mixed Original Detection
U- 4
Lightweight Original
U- 9
File Margin
U-10
Priority Paper Size/Source
U-12
AP/AS/Manual Priority
U-13
Default Auto Exposure Level
U-14
Default Exposure Mode/Level
U-15
Default Finishing Mode
U-18
Priority Orig.
Description of Each User's Choice Function
U-0 Mixed Original Detection
Select whether to enable the Mixed Original Detection function or not when power
is turned ON or panel reset on the copier equipped with an Automatic/Duplexing Document Feeder.
Setting
0
Mixed Original Detection function ON
Mixed Original Detection function OFF
1
U-4 Lightweight Origina
Select the type of originals used on the ADF. Set "1" (Lightweight Original mode ON) if originals
lighter in weight than standard (weighing 40 to 50 g/m
Setting
0
Lightweight Original mode OFF
Lightweight Original mode ON
1
Function
Choice Code
Copy Type
Description
Description
U-20
Auto Panel Reset ON/OFF
U-21
Energy Saver ON Timing
Auto Panel Reset for Plug-In
U-23
Counter
Sort/Non-Sort Auto Switching
U-24
ON/OFF
U-28
Auto Shut OFF Timing
Special Paper setting
U-51
(1st Drawer)
Special Paper setting
U-52
(2nd Drawer)
Special Paper setting
U-53
(3rd Drawer)
Special Paper setting
U-54
(4th Drawer)
2
) are used with the ADF.
Function
1151H07OBA
Initial Setting
1151H08OBA
Initial Setting
1151H09OBA
Advertisement
Table of Contents
