3-3.
Settings in the Utility Mode
Touch Panel
Display
Default Settings
Select the copying function settings established when the Power
Switch is turned ON or the Panel Reset key is pressed.
NOTE
• To designate the "Current Settings," first make the necessary set-
Meter Count
Displays the counts of various counters. Pressing the Start key will let
the copier produce a printed page of the counts of various counters.
Job Memory Input Permits programming of various functions, including copying jobs.
User's Choice
User's Choice is used to make various settings according to the
user's need.
Administrator
The entry of the "Administrator #" set using the Tech. Rep. mode per-
Mode
mits the settings of the following functions.
Scanner Addr.
Program the one-touch address for the Scanner mode.
Input
(1)
User's choice mode
• User's Choice is used to make various settings according to the user's need.
1. User's Choice Function Setting Procedure
<Procedure>
1. Press the Utility key.
2. Touch the "User's Choice" key.
3. Select the appropriate screen from the menu.
4. Select the appropriate function.
5. After the settings are complete, touch the "OK" key to validate the settings.
<Exiting the Mode>
• Press the "OK" key.
tings on the control panel, then touch "Current Settings."
Current Settings
S-10
Setting
Factory Settings