Table of Contents
Advertisement
Before Making Copies
Interrupting a Copy Job
The job being printed can be interrupted.
This mode is convenient for pausing the current copy job in order to make
a quick copy of a different document.
For details on prioritizing a copy job so that it will be printed when the
current job is finished (without interrupting the current job), refer to
"Increase Priority screen" (p. 6-56).
Note
Some functions cannot be interrupted.
In addition, certain functions cannot be set if the copier is in Interrupt
mode. For more details, refer to the "Function Combination Table"
(p. 13-12).
To interrupt a copy job
1
Press the [Interrupt] key while a job
is being printed.
H
The [Interrupt] key indicator
lights up.
H
The message "Now in the
Interrupt mode." appears.
(At this point, printing of the job
before the interruption continues.)
H
The Copy mode settings return to their defaults.
(The Copy mode settings of the job before the interruption and the
remaining number of copies are recorded.)
H
If no operation is performed for 1 minute after the [Interrupt] key is
pressed, the Interrupt mode is automatically canceled.
2
Position the document(s) to be copied.
3
Select the desired Copy mode settings.
4
Press the [Start] key.
"Stopped Print" appears below Status in the job display.
5
Scanning of the document begins.
The job queue is displayed, and the job that printing was interrupted
for is added to the queue.
CF2002/CF3102
3
3-33
Advertisement
Table of Contents
