Table of Contents
Advertisement
10
15
Press the [Start] key.
The automatic color shift adjustment procedure begins, and the test
pattern is printed on the A3-size paper.
16
Check the distance from the reference line of the black lines to the
cyan lines in the test pattern along the X and Y directions.
H
If there is no shift in the reference line, skip to step 23.
17
If the lines are shifted as shown at
the right, touch
desired negative adjustment for "X"
(between -1 dot and -6 dots).
18
If the lines are shifted as shown at
the right, touch
desired positive adjustment for "X"
(between +1 dot and +6 dots).
19
If the lines are shifted as shown at
the right, touch [Y], and then touch
to specify the desired
negative adjustment for "Y"
(between -1 dot and -6 dots).
20
If the lines are shifted as shown at
the right, touch
desired positive adjustment for "Y"
(between +1 dot and +6 dots).
21
Press the [Start] key. The adjusted
test pattern is printed on A3-size
paper.
10-28
Administrator Mode Operations
to specify the
to specify the
to specify the
CF2002/CF3102
Advertisement
Table of Contents
