Table of Contents
Advertisement
10
8
Press the [Start] key. The test pattern is printed on A3-size paper.
9
Check that the left margin of the test pattern for the second side is
between 2.5 mm and 3.5 mm.
If the left margin for the second side is within the specified range, skip
to step 14.
10
If the left margin for the second side is less than 2.5 mm, touch
to specify the desired positive adjustment (between +0.1 mm and +3.0
mm).
11
If the left margin for the second side is more than 3.5 mm, touch
to specify the desired negative adjustment (between -0.1 mm and -3.0
mm).
12
Press the [Start] key.
The adjusted test pattern is printed on A3-size paper.
13
Check the print result to make sure that the left margin for the second
side is adjusted to between 2.5 mm and 3.5 mm.
H
If more adjustment is necessary, return to step 8 and repeat the
adjustment procedure.
14
Touch [Enter].
15
Touch [Fin. Time] again in the next three screens that appear.
10-36
Administrator Mode Operations
c
c: 3.0 mm ± 0.5 mm
CF2002/CF3102
Advertisement
Table of Contents
