Table of Contents
Advertisement
Enlarge Display Mode
12
Select the setting for the type of paper that is loaded, and then touch
[Enter].
The Paper Type setting is specified.
13
Open the manual bypass tray.
14
Prepare one sheet of the paper.
15
Load the paper into the manual bypass tray so that the front side of the
paper (the side facing up when the package was unwrapped) faces
down.
H
When making manual double-sided copies, load the paper into the
manual bypass tray so that the second side (the blank side) faces
down.
H
The image will be printed on the surface of the paper facing down
when the paper is loaded into the manual bypass tray.
16
Adjust the paper guides to fit the
size of paper that is loaded.
17
Lightly slide the paper into the feed
slot as much as possible so that the
edge of the paper is fed into the
copier.
H
Feed only one sheet of paper at
a time.
18
Printing can begin.
H
The copy operation is programmed as a copy job.
H
Printing is performed in the order that the jobs are programmed.
CF2002/CF3102
8
8-33
Advertisement
Table of Contents
