Table of Contents
Advertisement
Enlarge Display Mode
H
Touch
moves below the fraction that
you wish to change.
The entered length of side Y
appears. (For this example, 9
inches is specified.)
H
After you are finished specifying
the paper size settings, continue
with step 8.
6
Use the keypad to type in the length of side X for the paper that is
loaded. (between 140 mm and 457 mm)
The entered length of side X appears. (For this example, 200 mm is
specified.)
7
Touch [Y], and then use the keypad
to type in the length of side Y for the
paper that is loaded. (between 90
mm and 311 mm)
The entered length of side Y
appears. For this example,
100 mm is specified.)
8
Touch [1] or [2].
H
The paper size specified in
steps 4-5 and steps 6-7 appear
on the selected key.
H
The custom paper size is
programmed.
9
Touch [Enter], and then touch [Enter] in the next screen that appears.
CF2002/CF3102
until the cursor
8
8-29
Advertisement
Table of Contents
