Table of Contents
Advertisement
10
7
If the staple position is too far to the
left of the center of the paper, touch
to specify the desired positive
adjustment (between +1 mm and +7
mm).
8
If the staple position is too far to the
right of the center of the paper,
touch
negative adjustment (between
-1 mm and -7 mm).
9
Touch [Folding Position].
10
If the folding position is shifted to the
left, touch
desired positive adjustment
(between +1 mm and +7 mm).
11
If the folding position is shifted to the
right, touch
desired negative adjustment
(between
-1 mm and -7 mm).
12
Touch [Enter].
13
Touch [Fin. Time] in the next three
screens that appear.
14
Use the "Booklet Creation" setting to make another copy sample.
15
Check the print result.
H
If more adjustment is necessary, return to step 1 and repeat the
adjustment procedure.
10-38
to specify the desired
to specify the
to specify the
Administrator Mode Operations
CF2002/CF3102
Advertisement
Table of Contents
