Table of Contents
Advertisement
10
8
Press the [Start] key. The test pattern is printed on the A3-size paper.
9
Check that the left margin of the test pattern is between 2.5 mm and
3.5 mm. If the left margin is within the specified range, skip to step 14.
10
If the left margin is less than 2.5 mm, touch
positive adjustment (between +0.1 mm and +3.0 mm).
11
If the left margin is more than 3.5 mm, touch
desired negative adjustment (between -0.1 mm and -3.0 mm).
12
Press the [Start] key. The adjusted test pattern is printed on A3-size
paper.
13
Check the print result to make sure that the left margin is adjusted to
between 2.5 mm and 3.5 mm.
H
If more adjustment is necessary, return to step 8 and repeat the
adjustment procedure.
14
Touch [Enter].
15
Touch [Fin. Time] again in the next three screens that appear.
10-34
Administrator Mode Operations
b
b: 3.0 mm ± 0.5 mm
to specify the desired
to specify the
CF2002/CF3102
Advertisement
Table of Contents
