Table of Contents
Advertisement
Basic Operations
Memory Recall Screen
Past copy jobs can be recalled and printed again.
Up to 49 past copy jobs are saved.
If the number of copy jobs exceeds 49 or the memory becomes full, jobs
are deleted, starting from the oldest.
Deleted jobs cannot be recalled.
Touch [Memory Recall]. The Memory Recall screen appears.
Jobs that have already been printed appear in order from the top of the list.
If the "Memory Recall" function on the User's Choice: 1 screen has been
set to "Yes", [Memory Recall] is available (jobs can be recalled from the
memory).
However, if the "Memory Recall" function on the User's Choice: 1 screen
has been set to "No", all jobs are erased after they are finished being
printed. ([Memory Recall] is not available.)
Deleted jobs cannot be recalled.
The "Memory Recall" function and the "Copy Track" function cannot be
used at the same time. In order to use the "Memory Recall" function, the
"Memory Recall" function on the User's Choice: 1 screen must be set to
"Yes" and the "Copy Track Mode" parameter on the "Copy Track" screen
must be set to "No".
For details on setting the "Copy Track Mode" parameter on the "Copy
Track" screen, refer to "To set the "Copy Track Mode" parameter" on
page 10-12
For details on setting the "Memory Recall" function on the User's Choice:
1 screen, refer to "To set the "Memory Recall" function" on page 9-17.
Note
If the copier is turned off, all saved jobs are deleted and can no longer
be recalled.
If the "Copy Track Mode" parameter on the "Copy Track" screen is set
to "Yes", the Memory Recall job control screen cannot be displayed. If
the "Memory Recall" function on the User's Choice: 1 screen is set to
"Yes", setting the "Copy Track Mode" parameter on the "Copy Track"
screen to "Yes" automatically changes the "Memory Recall" function to
"No".
CF2002/CF3102
6
6-63
Advertisement
Table of Contents
