7
6
Touch arrow keys to specify the width that is to be erased.
H
The specified width of the area to be erased is the width before
copying. Therefore, be careful when selecting this setting while
making enlarged or reduced copies.
Example) When using the "Edge/Frame Erase" function while
copying an A3-size document with a zoom ratio of 0.5.
7
Normally, the document size is automatically detected. However, if
you wish to specify the document size, touch [Size Input].
Select the document size, and then touch [Enter].
7-60
Original (A3L)
× 0.5
20 mm
Advanced Operations
Copy (A5L)
10 mm
CF2002/CF3102