NetComm 3G38WV-TS User Manual page 51

Call feature codes
Quick Reference Table
The NetComm Smart Hub 4G supports a number of call feature codes for supplementary services.
FEATURE
Caller ID
Call Waiting
Call Forwarding Unconditional
Call Forwarding No Answer
Call Forwarding Busy
Call Forwarding Unreachable
Caller ID
Caller ID transmits a caller's number to the called party's telephone equipment when the call is being set up but before the call is
answered. Where available, caller ID can also provide a name associated with the calling telephone number.
To force Caller ID to be blocked for an outbound call, dial #31# followed by the number you wish to dial.

 To force Caller ID to be unblocked for an outbound call, dial *31# then follow the dialling number.
Call Waiting
Call waiting allows for indication and answering of an incoming telephone whilst an existing call is underway.
 To disable call waiting, dial #43#, and hang up after you hear 2 high pitch beeps.
 To enable call waiting, dial *43#, and hang up after you hear 2 low pitch beeps.
 To check the status of Call Waiting, dial *#43# or view the advanced status page of the management console.
Call waiting is disabled if you hear 2 high pitch beeps.
o
Call waiting is enabled if you hear 2 low pitch beeps.
o
Call forwarding (or call diverting), is a feature that allows an incoming call to be redirected to another number depending on the
circumstances at the time of receiving the call.
Please note: The Call Waiting feature will automatically turn off if you enable Call forwarding. Call Waiting will need to be
enabled again after Call Forwarding is disabled.
Call Forwarding Unconditional
Call forwarding Unconditional will divert all incoming calls to a phone number that you desire.
To enable Call Forwarding Unconditional, dial *21*<Directory Number>#

(Where directory number is the number you wish to forward calls to)
 Hang up after you hear 2 low pitch beeps.
 To disable Call Forwarding Unconditional, dial #21#
 Hang up after you hear 2 high pitch beeps.
 To check the status of Call Forwarding Unconditional, dial *#21# or view the advanced status page of the
management console.
o Call Forwarding Unconditional is disabled if you hear 2 high pitch beeps.
o Call Forwarding Unconditional is enabled if you hear 2 low pitch beeps.
Call Forwarding No Answer
Call forwarding No Answer will divert all incoming calls to a phone number that you desire only if the incoming call is not answered.
To enable Call Forwarding No Answer, dial *61*<Directory Number>#

(Where directory number is the number you wish to forward calls to)
Hang up after you hear 2 low pitch beeps.

To disable Call Forwarding No Answer, dial #61#

Hang up after you hear 2 high pitch beeps.

To check the status of Call Forwarding No Answer, dial *#61# or view the advanced status page of the management

console.
o Call Forwarding No Answer is disabled if you hear 2 high pitch beeps.
o Call Forwarding No Answer is enabled if you hear 2 low pitch beeps.
NetComm Smart Hub 4G User Guide
51
ACTIVATION
#31#
(to block an individual call)
*43#
*21*<Directory Number>#
*61*<Directory Number>#
*67*<Directory Number>#
*62*<Directory Number>#
Table 33 - Additional Product Information - Call Feature Codes Quick Reference
DEACTIVATION
*31#
(to unblock an individual call)
#43#
#21#
#61#
#67#
#62#
STATUS
N/A
*#43#
*#21#
*#61#
*#67#
*#62#
YML38
www.netcommlimited.com