NetComm 3G38WV-TS User Manual page 24

PIN
Confirm PIN
PIN Protection
Please note: Voice and Data Roaming are disabled by default. The Management Console page will display a message
advising that Roaming is disabled if you attempt to utilise a Roaming service.
Band Settings
The band settings page enables you to select which frequency band the router will use for your Telus MBB connection and enable
you to scan for available network operators in your area.
The following frequency bands are available to select from:
Autoband

WCDMA All

WCDMA 850/1900

2G All

2G 850/1900

The default setting of "Autoband" should be appropriate for the majority of users.
You can also scan for available MBB service providers in your area by selecting "Manual" for the "Current Operator Selection Mode"
and then clicking the scan button.
A list of the detected MBB service carriers in your area will be displayed. Select the your Telus MBB service from the list shown and
click "Apply".
The default setting of "Automatic" should be appropriate for the majority of users and locations.
YML38
www.netcommlimited.com
If the router is configured with to use a PIN number with the SIM card as a means of security, the correct 4
number PIN will need to be entered here before the SIM card can be used with the router.
Retype the correct PIN number into this field if PIN number security is enabled for use with the SIM card.
The status of the PIN protection on the router. Options include Disable PIN, Enable PIN and Change PIN.
Table 12 - Advanced View - Internet Settings
Figure 26 - Advanced View – Band Selection
Figure 27 - Advanced View – Operator Selection
3G38WV-TS
Telus 3G38WV-TS User Guide
24