NetComm 3G38WV-TS User Manual page 21

Wireless
This wireless page in Basic view allows you to configure basic Wi-Fi settings for this device such as enabling/disabling the Wi-Fi
functionality, changing the Wireless Network Name (SSID) or the Wireless Security key. If you make any changes to the settings,
click "Save and apply changes" to make these changes active.
OPTION
Wireless (Wi-Fi) ON/ OFF:
SSID Broadcast Name (SSID):
SSID Broadcast:
Security Key Type
Security key:
WPA Algorithms
NetComm Smart Hub 4G User Guide
21
Figure 21 - Basic View – Wireless
Changing this option to Off will turn off the Wi-Fi feature on the NetComm Smart Hub 4G and you will not be
able to connect to your NetComm Smart Hib 4G wirelessly.
The SSID (Service Set Identifier) is the name of your wireless network. Use a unique name to identify your
wireless device so that your wireless clients can easily connect to it. This field is case sensitive and can be up to
32 characters long.
Select 'Disabled' to hide the SSID of your NetComm Smart Hub 4G. If disabled, other people will not be able to
easily see your NetComm Smart Hub 4G's SSID. To add wireless clients with broadcast disabled, the SSID will
need to be manually configured on each wireless client's wireless settings.
Select the type of wireless security to be used for the Wi-Fi network.
For more information please see the Wireless Security chapter on page 36.
Enter your chosen Wireless Security key here. The default WPA-PSK key is printed on the wireless security
card and on the Product ID on the bottom of the NetComm Smart Hub 4G. Please note that whilst the key can
be customized on this page, the key will revert to the default if the NetComm Smart Hub 4G is reset to factory
default.
Select the type of WPA encryption to use.
Table 11 - Basic View - Wireless
DEFINITION
YML38
www.netcommlimited.com