NetComm 3G38WV-TS User Manual page 26

DHCP
This connection will get the IP address from the Internet service provider. Use this default WAN Connection Type setting unless
instructed otherwise by your Internet Service Provider.
NAME
Host Name Input the host name of your computer. This is optional, and is usually only required if your service provider asks you to do so.
Input the MAC address of your computer here if your service provider only permits computers with a certain MAC address to
access the Internet. If you are using a computer which was used to connect to the Internet via a cable modem, you can
Mac Clone
simply press the 'Default' button. The router will then automatically detect the MAC address of your computer and populate
the MAC address field with it.
NAT Configuration Enable or disable Network Address Translation for this connection type.
Please refer to the WAN Failover Backup section on page 29 for information on configuring the WAN failover feature and
enabling the Failover notification function.
Click 'Apply' to save the settings.
YML38
www.netcommlimited.com
Figure 29 - Advanced View - WAN - DHCP Settings
DESCRIPTION
Table 14 - Advanced View - WAN Settings - DHCP
3G38WV-TS
Telus 3G38WV-TS User Guide
26