NetComm 3G38WV-TS User Manual page 38

WPA-PSK/WPA2-PSK
A newer type of security is WPA-PSK (TKIP) and WPA2-PSK (AES). This type of security gives a more secure network when
compared to WEP security. Use TKIP Encryption Type for WPA-PSK and AES for WPA2-PSK. After that, please enter the key in the
Passphrase field. The key needs to be more than 8 characters and less than 63 characters and can be any combination of letters
and numbers.
Please note that the configuration for WPA-PSK and WPA2-PSK is identical.
Your NetComm Smart Hub 4G uses WPA2-PSK by default. Check your Wireless Security Card or the device label on the
bottom of the NetComm Smart Hub 4G for your default SSID and Security key to begin connecting your wireless devices.
802.1x
In order to use 802.1X security, you need to have a RADIUS server on your network that will act as the authentication server. Please
type in the details for your RADIUS server in the fields required.
Please note: After configuring wireless security, you also need to configure your wireless adapter to use the same security
settings before you can connect wirelessly. Not all wireless adapters support WPA-PSK/WPA2-PSK/WPA/WPA2 security.
Please refer to your wireless adapter user guide for more details. It is strongly recommended to set up a simple wireless
security such as WPA-PSK (when the wireless client supports WPA-PSK) in order to secure your network.
Most wireless adapters in computers and laptops support at least WEP and WPA security types.
YML38
www.netcommlimited.com
Figure 42 - Advanced View - Wi-Fi Security Settings - WPA-PSK/WPA2-PSK
Figure 43 - Advanced View - Wi-Fi Security Settings - 802.1x
3G38WV-TS
Telus 3G38WV-TS User Guide
38