NetComm 3G38WV-TS User Manual page 30

Failover Notifications
Failover notifications enable you to send an email or SMS to the nominated email address and/or mobile telephone number in the
event that the primary Ethernet WAN connection becomes unavailable. A message will also be sent when the primary Ethernet
WAN connection becomes available again.
To configure the failover notification methods enter the appropriate configuration information and the enter the email addresses for
each of the failover notification recipients and/or enter up to 10 destination phone numbers for the SMS message to be sent to and
click "Apply" to save the settings.
You can also test these settings by clicking the "Send Email" button.
NAME
SMS Setting
Email Settings
To: Seperator(;)
CC: Seperator(;)
From
Mail Server Address (SMTP)
Mail Server Port
Username
Password
Confirm Password
YML38
www.netcommlimited.com
Figure 33 - Advanced View - Failover Notification Settings
Enter up to 10 mobile phone numbers to whom the failover notification message will be sent.
Enter the email addresses of the failover notification recipients. Use a semi-colon between each email
address.
Enter the email addresses of those contacts you wish to send a copy of the failover notification recipients.
Use a semi-colon between each email address.
Enter the email address for the sender.
Enter the SMTP server address of the (sending) mail server the email account uses.
Enter the port used by the SMTP server. The default port is 25.
Enter the username of the SMTP mail server (if required).
Enter the password of the SMTP mail server (if required).
Retype the password of the SMTP mail server (if required).
Table 18 - Advanced View - WAN Failover Notification Settings
DESCRIPTION
3G38WV-TS
Telus 3G38WV-TS User Guide
30