Using Master Effects; Playing With Pattern Set; Setting The Bpm (Tempo); Adding Variation To Sound By A Knob - Korg EFGSCJ 3 Owner's Manual

Gate Arp button
Touch pad
3. Sounds can be modified by using the touch pad.
X axis: Alters the gate speed.
Y axis: Alters the length of sound.
X
TIP You can change pattern of the gate arpeggiator in the
GATE ARP page in the edit menu.

4. Using master effects

1. Press the Master Fx button.
2. Select the part where you want to apply the master effect, and
then press the MFX Send button to turn it ON.
3. Touching the touch pad will apply the effect.
TIP Select the master effect type in the MFX TYPE page of the
edit menu when you want to change effect types.
There may be some noise depending on position where
you touch the touch pad.
Master Fx button
Touch pad
Trigger pad
Y
MFX Send button
Trigger pad

5. Playing with pattern set

What is a pattern set?
A pattern set is a function used to register a pattern to the
trigger pad to enable easy pattern switching. You can switch
desired patterns one after another during playback.
Registering a pattern to a trigger pad
1. Press the Pattern Set button to illuminate the button.
2. Press a Step button from 1 to 4 to select a group to register.
3. Select a pattern to register by using the Value knob.
4. Press a trigger pad to register while you press and hold the
Pattern Set button.
Value knob
Playing with a pattern set
1. Press the Pattern Set button to illuminate the button.
2. Press the Step button (1 to 4) to select the group where the
desired pattern is registered.
3. Pressing a trigger pad will play back the pattern which is
registered to that respective trigger pad.

6. Setting the BPM (tempo)

You can select the tempo for the pattern or gate arpeggiator.
Setting BPM
Pressing the Tap button fat the approximate tempo you want will
set the BPM value at the interval that you tap it.
You can also set the tempo manually by using the Value knob once
the BPM parameter is selected from the edit menu.

7. Adding variation to sound by a knob

You can alter the sound by using the knob to change the Filter or
Oscillator Edit parameters of the edit section.
Refer to the "Parameter Guide" for details of each knob.
TIP Depending on the settings, there may be some noise or
audio dropouts in your signal.
Pattern Set button
Trigger pad
11