Advertisement
QuickSpecs
Technical Specifications
1. Device Bays 1-16
2. Device Bays 2
3. Device Bays 3
4. Device Bays 4
5. Device Bays 5
6. Device Bays 6
7. Device Bays 7
8. Device Bays 8
NOTE: Half-height servers should be populated from top and bottom from left to right from the front of the enclosure. So the first
NOTE:
NOTE:
NOTE:
two half-height servers would be placed in bays 1 & 9 the second two half-height servers would be placed in bays 2 & 10 and so on
until the enclosure is full.
1. Device Bays 1-8
2. Device Bay 2
3. Device Bay 3
4. Device Bay 4
NOTE: Full-height servers should be populated from left to right.
NOTE:
NOTE:
NOTE:
c7000 Enclosure - Mixed Configuration - Full Height and Half-Height Population rules
c7000 Enclosure - Mixed Configuration - Full Height and Half-Height Population rules
c7000 Enclosure - Mixed Configuration - Full Height and Half-Height Population rules
c7000 Enclosure - Mixed Configuration - Full Height and Half-Height Population rules
c7000 Enclosure - Full-height server blade bay numbering
c7000 Enclosure - Full-height server blade bay numbering
c7000 Enclosure - Full-height server blade bay numbering
c7000 Enclosure - Full-height server blade bay numbering
DA - 12517
Worldwide — Version 19 — September 15, 2008
HP BladeSystem c-Class Infrastructure
HP BladeSystem c-Class Infrastructure
HP BladeSystem c-Class Infrastructure
HP BladeSystem c-Class Infrastructure
9.
Device Bays 9
10. Device Bays 10
11. Device Bays 11
12. Device Bays 12
13. Device Bays 13
14. Device Bays 14
15. Device Bays 15
16. Device Bays 16
5.
Device Bay 5
6.
Device Bay 6
7.
Device Bay 7
8.
Device Bay 8
Page 42
Advertisement
