HP c-Class Overview page 37

QuickSpecs
Storage
Tape Libraries and Virtual Library Systems Tape Libraries and Virtual Library Systems Tape Libraries and Virtual Library Systems Tape Libraries and Virtual Library Systems
NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the following: NOTE: NOTE: NOTE:
http://h18000.www1.hp.com/products/quickspecs/Division/10233.html
NOTE: NOTE: NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Autoloaders & Tape Libraries listed below, NOTE:
please see the following:
http://h18000.www1.hp.com/products/quickspecs/Division/10809.html
NOTE: For complete listing of tape drive offerings see NOTE: NOTE: NOTE:
http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html
For details on connecting tape drives to this server, see the following:
HP StorageWorks Tape HP StorageWorks Tape HP StorageWorks Tape HP StorageWorks Tape
Libraries, External Libraries, External Libraries, External Libraries, External
MSL2024
MSL4048
MSL6000
HP StorageWorks Virtual HP StorageWorks Virtual HP StorageWorks Virtual HP StorageWorks Virtual
Library Systems Library Systems Library Systems Library Systems
12000 VLS
1002i VLS
6218 VLS
6227 VLS
6636 VLS
6653 VLS
Position Position Position Position Position Position Position Position
Supported Supported Supported Supported Controller Controller Controller Controller
External Please consult the EBS connectivity matrix at
http://www.hp.com/go/ebs
External Please consult the EBS connectivity matrix at
http://www.hp.com/go/ebs
DA - 12517 Worldwide — Version 19 — September 15, 2008
HP BladeSystem c-Class Infrastructure HP BladeSystem c-Class Infrastructure HP BladeSystem c-Class Infrastructure HP BladeSystem c-Class Infrastructure
Mezzanine Pass-Thru Card for BladeSystem
c-Class (431643-B21) is required. This
card is installed in mezzanine 3 connector
in the server blade.
Identify the partner server blade to be
installed with the tape blade. The two
blades always occupy a pair of slots, as
follows: 9 & 10, 11 & 12, 13 & 14, 15 &
16 (See Figure 2).
If the partner server blade is installed in an
odd-numbered bay, the tape blade is
installed in the adjacent even-numbered
bay to the right.
If the partner server blade is installed in an
even-numbered bay, the tape blade is
installed in the adjacent odd-numbered
bay to the left.
The tape blade is always located on the
lower row of the enclosure when installed
next to a full-height server blade.
(Worldwide)
(Worldwide)
for detailed connectivity information
for detailed connectivity information
Part Number Part Number Part Number Part Number
N/A
N/A
Page 37