Table of Contents
Advertisement
2009
DTT VoIP2All USER MANUAL
6. Sett this settings and press OK.
7. Press "Connect" in the Hyper Terminal.
8. When restarting the Gateway you will see the initialization process. Wait until it finished.
9. Press the Enter button. On screen you will see #.
10.
11. On screen the window below will appear:
12.
VoIP
2
All™ Series: 4 Channel Gateway User Manual
To see the IP settings write the command 'ifconfig' and press Enter.
The IP Address of the Gateway is marked in a red circle.
39
Advertisement
Table of Contents
Need help?
Do you have a question about the VoIP2 All Series and is the answer not in the manual?