Discovery Telecom VoIP2 All Series User Manual page 38

2009
DTT USER MANUAL
2. To see the messages open the SMS Inbox tab in the Port Control window.
3. Press Delete to deletes the massages.
4. Press the Font button to select a different font.
5. Press the Save button to save the messages.
Appendix A: Com Port
The Com Port connection, give you direct access to the Linux based operating system files of the
DSP.
1. Connect the Com Cable from the Gateway to the PC RS232 COM Port.
2. Connect the Hyper Terminal press "Disconnect" than "Properties".
3. In the "Connect To" tab press "Configure", The "Port Setting" should be:
4. Press "OK" and move to the Settings tab.
5. Press ASCII Setup:
VoIP 2 All™ Series: 4 Channel Gateway User Manual
38