Discovery Telecom VoIP2 All Series User Manual page 19

2009
DTT VoIP2All USER MANUAL
•
•
•
Working with VoIP
There are two ways of registering a SIP client in the Gateway internal SIP Server: registering
with authentication password, or registering without authentication password.
When you are registering the users with authentication password, you need to work with the
Users list.
A user that wants to register in the SIP Server will have to be registered with the VoIP number
and the password that was preset in his user account.
Registering in the SIP Server without authentication
1. Open the configuration page of your SIP phone.
2. Set up the account with these parameters:
•
•
•
3. Save the registration settings.
4. Register with the new account.
5. In the VoIP
Registering in the SIP Server with authentication
1. Open the SIP tab.
2. Mark the "Authentication" check box.
3. Press "Save"
4. Open the Users window.
5. Add a new user with this account information:
•
•
•
VoIP 2 All™ Series: 4 Channel Gateway User Manual
The User ID is an identification number in the Sip Server for this account.
The User Name is the sip account number.
The User IP is the IP Address of this sip account.
2
ALL Internal SIP Server
The "SIP Server IP Address" is the IP address of the Gateway.
The "SIP User ID" is the chosen number for this extension.
The 'Authentication Password', you can leave empty.
2
ALL, open the 'SIP Status' window and see that the SIP phone registered.
The "VoIP Num" is the chosen extension number for this user.
The "Secret" is the chosen authentication password for this user.
The 'ID' should be set to an empty one.
19